Master II+ Series (3P/1P) – Rack

PRO83100-ERS/ERL SERIES 10-20KVA

True double-conversion

DSP technology guarantees high performance

Output power factor 0.9

Wide input voltage range (110-300 VAC)

Active power factor correction in all phases

Built-in phase auto adapt function simplifies
wire installation

MODEL

PRO83110-ERS/ERL 10KVA

GENERAL

UPS Type Rack
Phase 3 phase in / 1 phase out
Rating (VA) 10000VA
Nominal Power (W) 9000W
Standard Model

Dimension (mm)

UPS Unit: 668 x 438 x 133 [3U] (D x W x H)

Battery Pack: 580 x 438 x 133 [3U] (D x W x H)

Weight (kg) UPS Unit: 22

Battery Pack: 63

Long-run Model

Dimension (mm)

668 x 438 x 133 [3U] (D x W x H)
Weight (kg) 22

INPUT

Connection Type Terminal
Nominal Voltage 3x 380/400/415 (3Ph+N)
Voltage Range 190-520 VAC (3-phase) at 50% load

305-478 VAC (3-phase) at 100% load

Frequency Range 46~54 Hz or 56~64Hz
Power Factor ≧0.99 @ 100% Load
THDi < 6% @ 100% Load

OUTPUT

Connection Type Terminal
Nominal Voltage 208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 46~54 Hz ◎ 50Hz / 56~64 Hz ◎ 60Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3:1 (max.)
Harmonic Distortion ≦2% THD (Linear load)

≦5% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys. LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

12V / 9Ah
Numbers 20 (18 - 20 adjustable)*
Typical Recharge Time  9 hours recover to 90% capacity
Long-run Model

Type

Depending on the capacity of external batteries
Numbers Depending on the capacity of external batteries
Charging Current (max) 4A

REAR PANEL

  1. RS-232 communication port
  2. USB communication port
  3. Emergency power off function connector (EPO connector)
  4.  Share current port
    (only available for parallel configuration)
  5.  Parallel port (only available for parallel configuration)
  6.  Intelligent slot
  7. Line input circuit breaker
  8. Utility input terminal
  9. Output terminal: connect to mission-critical loads
  10.  External battery connector/terminal
    (only available for Long-run model)
  11. External maintenance bypass switch port
  12. Cooling Fan
  13. Grounding terminal
PRO83115-ERS/ERL 15KVA

GENERAL

UPS Type Rack
Phase 3 phase in / 1 phase out
Rating (VA) 15000VA
Nominal Power (W) 13500W
Standard Model

Dimension (mm)

UPS Unit: 668 x 438 x 266 [6U] (D x W x H)

Battery Pack: 580 x 438 x 133 [3U] x 2PCS (D x W x H)

Weight (kg) UPS Unit: 45

Battery Pack: 63 x 2 pcs

Long-run Model

Dimension (mm)

668 x 438 x 266 [6U] (D x W x H)
Weight (kg) 45

INPUT

Connection Type Terminal
Nominal Voltage 3x 380/400/415 (3Ph+N)
Voltage Range 190-520 VAC (3-phase) at 50% load

305-478 VAC (3-phase) at 100% load

Frequency Range 46~54 Hz or 56~64Hz
Power Factor ≧0.99 @ 100% Load
THDi < 6% @ 100% Load

OUTPUT

Connection Type Terminal
Nominal Voltage 208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 46~54 Hz ◎ 50Hz / 56~64 Hz ◎ 60Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3:1 (max.)
Harmonic Distortion ≦2% THD (Linear load)

≦5% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys, LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

12V / 9Ah
Numbers 20 x 2 strings (18 - 20  adjustable)*
Typical Recharge Time  9 hours recover to 90% capacity
Long-run Model

Type

Depending on the capacity of external batteries
Numbers Depending on the capacity of external batteries
Charging Current (max) 4A

REAR PANEL

  1. RS-232 communication port
  2. USB communication port
  3. Emergency power off function connector (EPO connector)
  4.  Share current port
    (only available for parallel configuration)
  5.  Parallel port (only available for parallel configuration)
  6.  Intelligent slot
  7. Line input circuit breaker
  8. Utility input terminal
  9. Output terminal: connect to mission-critical loads
  10.  External battery connector/terminal
    (only available for Long-run model)
  11. External maintenance bypass switch port
  12. Cooling Fan
  13. Grounding terminal
PRO83120-ERS/ERL 20KVA

GENERAL

UPS Type Rack
Phase 3 phase in / 1 phase out
Rating (VA) 20000VA
Nominal Power (W) 18000W
Standard Model

Dimension (mm)

UPS Unit: 668 x 438 x 266 [6U] (D x W x H)

Battery Pack: 580 x 438 x 133 [3U] x 2PCS (D x W x H)

Weight (kg) UPS Unit: 45

Battery Pack: 63 x 2 pcs

Long-run Model

Dimension (mm)

668 x 438 x 266 [6U] (D x W x H)
Weight (kg) 45

INPUT

Connection Type Terminal
Nominal Voltage 3x 380/400/415 (3Ph+N)
Voltage Range 190-520 VAC (3-phase) at 50% load

305-478 VAC (3-phase) at 100% load

Frequency Range 46~54 Hz or 56~64Hz
Power Factor ≧0.99 @ 100% Load
THDi < 6% @ 100% Load

OUTPUT

Connection Type Terminal
Nominal Voltage 208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 46~54 Hz ◎ 50Hz / 56~64 Hz ◎ 60Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3:1 (max.)
Harmonic Distortion ≦2% THD (Linear load)

≦5% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys, LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

12V / 9Ah
Numbers 20 x 2 strings (18 - 20 adjustable)*
Typical Recharge Time  9 hours recover to 90% capacity
Long-run Model

Type

Depending on the capacity of external batteries
Numbers Depending on the capacity of external batteries
Charging Current (max) 4A

REAR PANEL

  1. RS-232 communication port
  2. USB communication port
  3. Emergency power off function connector (EPO connector)
  4.  Share current port
    (only available for parallel configuration)
  5.  Parallel port (only available for parallel configuration)
  6.  Intelligent slot
  7. Line input circuit breaker
  8. Utility input terminal
  9. Output terminal: connect to mission-critical loads
  10.  External battery connector/terminal
    (only available for Long-run model)
  11. External maintenance bypass switch port
  12. Cooling Fan
  13. Grounding terminal

DOWNLOAD

Document Date Version
2017-08-07 1.00
2017-08-07 1.00

You may also like…

PRO800-ERS/ERL SERIES 1-3KVA

PRO83300-ES/EL SERIES 10-30KVA

PRO83300-FS/FL SERIES 30-200KVA

PRO800-QS/QL SERIES 1-10KVA

PRO800-ES/EL SERIES 1-3KVA